EverFocus EDR410H - Manual (Page 49)

¾ DHCP: This field represents DHCP which stands for Dynamic Host
Configuration Protocol. DHCP's purpose is to enable individual
computers on an IP network to extract their configurations from a server
(the 'DHCP server') or servers, in particular, servers that have no exact
information about the individual computers until they request the
information.
Yes: Turns DHCP on and the IP Address will be picked up
automatically.
No: Turns DHCP off and the IP Address will be have to be entered
in manually. An screen shot is shown on the next page.
¾ IP Address: This field is to set a static IP Address for the DVR. A static
IP address is an IP address whose value does not change. Everfocus
suggest using a static IP address. If your Internet provider does not offer
a static IP address you have the option to use a dynamic IP address. For
Example: A Test IP address given to the machine by our engineers is
192.168.010. When DHC
he DHCP server will assign this
value automatically.
r more details.
¾ ask for your network
as the DVR will be recognized within the network. Example:
¾ GA r network so the
DVR will be recognized within the network. An example of this is
machine within our own
network.
¾ DNS SERVER: This field is to set the DNS server for your network so
P is YES, t
ƒ Note: The Addresses in the machine are for our own testing
you must apply your own addresses to comply with your
network. Refer to Networking Chapter fo
SUBNET MASK: This field is to set the subnet m
so
255.255.255.000.
TEWAY: This field is to set the gateway for you
provided within the DVR we use to test the
the DVR will be recognized within the network.
41