EverFocus EDR410H - Manual (Page 44)

¾ CONTROL PORT: The default port number is 1600. User can change
it to different port number for controlling comment between DVR and
client PC.
¾ Note: If you wish to have multiple users log into the DVR
open a range of ports on your router. For example if you
use the default port 1600 you would open ports 1600 on your
router. This will allow 4 clients to login
¾ DATA PORT: The default data transmitting port number is 32760. User
and client PC.
¾ multiple users log into the DVR
please open a range of ports on your router. For example if you
u would open ports 32760-32763
on your router. This will allow 4 clients to login
¾
3.7.2 A
DV can
ALARM of the
please
can change it to different port number for data transfer between DVR
Note: If you wish to have
use the default port 32760 yo
MAC ADDRESS: This field is for those Internet service providers or
Network administrators who require a MAC address of the network card
of our DVR. This option cannot be changed.
LARM NETWORK (To Be Released)
R send out Alarm message to an Alarm Server (PowerCon4). In the
NETWORK SETUP MENU, we define:
Diagram 3.11
36