Epson 850 - Manual (Page 139)

Specifications
D-8
Color and black
printing • EPSON Stylus PRO
• EPSON Stylus COLOR 500
• EPSON Stylus COLOR II
• LQ-860
• LQ-2550
Control Panel Settings
You can change the following default settings from the printer’s
control panel:
Changing control
panel settings Follow these steps to change the settings listed above:
1. Make sure the printer is turned off and has paper loaded.
2. Hold down the X color cleaning button and press the Ppower
button. The printer prints a summary of instructions for
changing settings and choosing a language for the instructions.
3. Press the X color cleaning button to print a list of current settings
(indicated with arrows) and additional instructions.
4. After you make the changes you want, turn the printer off to save
the settings. The settings remain in effect until you change them
again.
Setting Options
Print direction Auto, Bi-D, Uni-D
Font Courier, Roman, Sans Serif, Prestige, Script,
Roman T, Sans Serif H, Draft
Pitch 10 cpi, 12 cpi, 15 cpi, 17.1 cpi, 20 cpi,
Proportional
I/F mode Auto, Parallel, Serial, Option
Auto I/F wait time 10 seconds, 30 seconds
Software ESC/P 2, IBM X24E
Auto CR (IBM mode only) Off, On
AGM (IBM mode only) Off, On
Character table PC437, PC850, PC860, PC861, PC863, PC865,
Abicomp, BRASCII, Roman 8, ISO Latin 1
International character set
for italic table Italic U.S.A., Italic France, Italic Germany, Italic
U.K., Italic Denmark 1, Italic Sweden, Italic Italy,
Italic Spain 1
Auto line feed Off, On
Network I/F mode Off, On
Loading position 8.5 mm, 3 mm, Others
Economy Off, On
Parallel I/F transfer rate Fast, Normal
easapd.fm5 Page 8 Tuesday, March 24, 1998 1:18 PM