Beko 30 Inch Over the Range Convection Microwave Installation Guide - Manual (Page 13)

13 / 63 EN Over The Range Convection Microwave Oven / Installation Manual
4 External exhaust
4.4 Tools and materials
needed
# 1 Phillips screwdriver
Pencil
Ruler or tape measure and
straight edge
Carpenter square
(optional)
Tin snips (for cutting
damper, if required)
Electric drill with 3 ⁄
16
“ , 1 ⁄
2
“ and 5 ⁄
8
“
drill bits
Hammer (optional) Stud finder or
Filler blocks or scrap
wood pieces, if needed
for top cabinet spacing
(used on recessed bottom
cabinet installations only)
Gloves
Saw (saber, hole or keyhole)
Level
Duct and masking tape
Scissors
(to cut template, if necessary)
Safety goggles