Enterasys Networks Enterasys SecureStack A2 A2H124-48P - Manual (Page 79)

Console Port Pinout Assignments
SecureStack A2 PoE Installation Guide A-7
MGBIC-02 Specifications (1000BASE-T)
Console Port Pinout Assignments
The Console port is a DB9 serial communications port for local access to Local
Management. Refer to
Figure A‐1 for the Console port pin assignments.
Figure A-1 Console Port Pinout Assignments
Table A-12 MGBIC-02 Specifications
Item Specification
Supported Cable:
Type
Maximum Length Copper, Category 5 UTP
Up to 100 meters
Connector RJ45
Data Rate 1 Gbps, IEEE 802.3:2000 compatible
1000BASE-T operation only
Automatic crossover detection
TX Output impedance 100 ohms, typical at all frequencies between 1 MHz and 125 MHz
RX Input impedance 100 ohms, typical at all frequencies between 1 MHz and 125 MHz
1 Pin 2, Received Data (input) 3 Pin 5, Signal Ground
2 Pin 3, Transmitted Data (output) All other pins not connected.
5
1
9
6
3
2
1