Canon imagePROGRAF GP-300 - Manual (Page 95)

Specifying the Paper Length
When changing the length of paper after the paper has been advanced, specify the length as follows.
Note
• Specify the roll paper length when you have set Manage remaining roll amount to Barcodes . (See •
" Keeping Track of the Amount of Roll Paper Left .")
1. Tap paper settings display area on Home screen of operation panel. 1.
Note
• If the Home screen does not appear, press the HOME button. •
2. Tap Paper settings . 2.
3. Tap Advanced . 3.
4. Tap Roll length (change default) . 4.
5. Enter roll paper length. 5.
Specify the roll length as follows.
1. Tap the numerical input field. 1.
2. Tap the keypad appearing on the operation panel, enter the roll paper length, and then tap OK . 2.
3. Check the entered length and tap OK . 3.
95