Canon imagePROGRAF GP-300 - Manual (Page 107)

Specifying the Ink Drying Time
When you are using paper that takes longer for ink to adhere, ink may be transferred onto the paper surface
during ejection, soiling it. In that case, you may be able to improve the condition by setting the time to wait
for the ink to dry after printing.
Important
• Printer settings are applied when the ink drying time is not set in the printer driver. If the ink drying time •
is set in the printer driver, that setting has priority.
Note
• If the cutter touches the print surface on which the ink is not dry, the paper surface may become •
scratched or soiled, or the paper surface may rub when the paper falls and the surface may become
soiled.
To wait for the ink to dry without allowing printed materials to fall after printing, set Cutting mode on the
printer menu to Eject cut . (See " Specifying the Cutting Method for Rolls .")
• The ink drying time for sheets can also be set using this procedure. •
Set on the Printer
Set with the operation panel of the printer.
1. Tap paper settings display area on Home screen of operation panel. 1.
2. Tap Paper settings . 2.
3. Tap Advanced . 3.
4. Scroll the screen, tap Pause between scans or Pause between pages . 4.
107