Canon imagePROGRAF GP-300 - Manual (Page 453)

Switching the Paper Source to Match the Purpose
This printer has two paper sources: Roll Paper and Cut Sheet.
You can facilitate printing by selecting a paper source setting that matches your media type or purpose.
The procedure for setting paper source is as follows:
1. Select Quality & Media from the pop-up menu of the Print Dialog 1.
2. Select the media type 2.
For Media Type , select the same paper type loaded in the printer.
3. Select the paper source 3.
For Paper Source , select the item below that matches your purpose.
Roll Paper
Feeds paper using roll paper.
Cut Sheet
Feeds paper that was cut to a specific paper size.
4. Complete the setup 4.
Click Print .
When you execute print, the printer uses the specified paper source to print the data.
453