Canon imagePROGRAF GP-300 - Manual (Page 254)

Security Type Security type for Wi-Fi (infrastructure) Disabled/WEP 64bit/WEP 128bit/WPA
PSK TKIP/WPA PSK AES/WPA2 PSK
TKIP/WPA2 PSK AES/MIXED
WEP1 WEP key 1 for Wi-Fi (infrastructure) XXXXXXXX (up to 32 characters)
WEP2 WEP key 2 for Wi-Fi (infrastructure) XXXXXXXX (up to 32 characters)
WEP3 WEP key 3 for Wi-Fi (infrastructure) XXXXXXXX (up to 32 characters)
WEP4 WEP key 4 for Wi-Fi (infrastructure) XXXXXXXX (up to 32 characters)
WEP Certificate WEP certificate for Wi-Fi (infrastructure) Open/Shared/Auto
WEP Format WEP format for Wi-Fi (infrastructure) Hex/String
Direct Connection Setting Wireless direct setting information -
Device Name Wireless direct device name Wireless direct device name (up to 32
characters)
Channel Channel (Wireless direct) XXX (0 to 255)
SSID SSID Wireless direct network name (SSID) de-
vice name (up to 32 characters)
Security Type Security type for Wi-Fi (Wireless direct) Disabled/WPA2 PSK TKIP/WPA2 PSK
AES
WSD Setting WSD setting information -
Use WSD Use WSD On/Off
WSD Timeout Timeout 1/5/10/15/20 [min]
Use WSD Rx Optimization Use WSD reception optimization On/Off
Protocol Setting Protocol setting information -
Printer Name Printer name XXXXXXXX (up to 16 characters)
Use LPR Use LPR On/Off
Use Wired DRX Discontinuous reception (Wired LAN) On/Off
Use Wireless DRX Discontinuous reception (Wi-Fi) On/Off
Use RAW Use RAW On/Off
Use LLMNR Use LLMNR On/Off
Use Spanning Tree Use spanning tree On/Off
Use Dedicated Port Dedicated port setting On/Off
SNMP Setting SNMP setting information -
254