Canon imagePROGRAF GP-300 - Manual (Page 280)

4. Tap Manual . 4.
A confirmation message appears.
Note
• If you do not perform Auto (advanced) , a confirmation message prompting you to perform Auto •
(advanced) appears. In this case, tap Yes and perform Auto (advanced) .
5. Tap Yes . 5.
The paper source setting screen appears.
6. Tap Roll paper or Manual . 6.
A test pattern is printed for adjustment.
7. Tap D-1. 7.
8. Examine adjustment test pattern D-1 and determine the number with straight lines. 8.
A: Example with straight lines
B: Example with misaligned lines
Note
• If two patterns seem equally good and you cannot decide which one is better, choose an •
intermediate value. For example, choose 11 if you cannot decide whether pattern 10 or 12 is
better.
9. Repeat steps 7-8 to specify adjustment values for D-2 and other remaining patterns. 9.
Specify all the items displayed on the touch screen.
10. Tap OK . 10.
The adjustment value is now registered, and adjustment is complete.
280