Canon imagePROGRAF GP-300 User Manual
Page 278
When using sheets
Auto (standard)
: 2 sheets of unused paper, A4/Letter size or larger (or 1 sheet when using A2 or
larger)
Auto (advanced)
: 3 sheets of unused paper, A4/Letter size or larger (or 1 sheet when using A2 or
larger)
Perform adjustment as follows.
1.
Load paper.
1.
Loading Rolls in the Printer
Loading Sheets in the Printer
Important
• Always make sure the loaded paper matches the type of paper specified on the printer.
Adjustment cannot be completed correctly unless the loaded paper matches the settings.
2.
Tap
(
Setup
) >
Maintenance
on HOME screen.
2.
The
Maintenance
screen appears.
3.
Tap
Print Head Alignment
.
3.
4.
Tap
Auto (standard)
or
Auto (advanced)
.
4.
A confirmation message appears.
5.
Tap
Yes
.
5.
The paper source setting screen appears.
6.
Tap
Roll paper
or
Manual
.
6.
A test pattern is printed for adjustment.
Note
• If you are printing on sheets smaller than A2 size, a confirmation message prompting you to
continue printing appears on the touch screen. Tap
Yes
and follow the instructions on the touch
screen.
278