Canon imagePROGRAF GP-300 - Manual (Page 237)

By flicking the touch screen, you can check various settings of wireless direct.
Note
• The identifier (SSID) and password are specified automatically. •
• By tapping Show password , you can check the password. The password is required when •
connecting a device to the printer. (Depending on the device you are using, no password is
required.)
• By tapping Settings , you can change the following settings. •
Enable/disable Wireless Direct
Update SSID/password
Wireless Direct network (SSID)
Connection request confirmation
For updating the SSID / password or changing the name of the printer displayed on Wi-Fi Direct
compatible device, see
Change Wireless Direct Connection Setting .
Connecting Smartphone/Tablet to Printer
1. Turn on Wi-Fi communication on Wi-Fi Direct compatible device. 1.
For more on turning on Wi-Fi communication, see your device's instruction manual.
2. Select "DIRECT-XXXX-GP-NNNN" ("X" represents alphanumeric characters, NNNN 2.
means your printer model name.) from list displayed on device.
Note
• If "DIRECT-XXXX-GP-NNNN" does not appear on the list, wireless direct is not enabled. •
See Connect with Wireless Direct to enable wireless direct.
• You can change the name of the printer displayed on Wi-Fi Direct compatible devices. •
See Change Wireless Direct Connection Setting as necessary.
3. Enter password on Wi-Fi Direct compatible device. 3.
The device is connected to the printer.
Note
• You can check the password set for the printer by the following method. •
1. On the HOME screen, tap ( Network ). 1.
2. Tap Wireless Direct . 2.
3. Tap Show password . 3.
• If your Wi-Fi Direct compatible device is set to prioritize using Wi-Fi Direct and it is connecting •
to the printer, the printer displays a confirmation screen asking if you allow the device to
connect to the printer.
237