Canon imagePROGRAF GP-300 - Manual (Page 268)

Settings on Client PC
After setting up the print server system, set up the client system.
The procedure for setting up the client systems is as follows:
1. Install the printer driver on the client systems 1.
2. Display the printer list 2.
Open System Preferences , and select Printers & Scanners .
Click + to display the printer list.
3. Add a printer to be shared 3.
Select a shared printer displayed in the printer list, and then click Add .
The setup on the client systems is now completed.
Note
• The print procedures are the same as when the computer is connected directly to the printer with a USB
cable.
At the Page Setup dialog, select the printer that is connected to the print server to be used.
268