Compatible device, see, Change wireless direct connection setting – Canon imagePROGRAF GP-300 User Manual
Page 238
Make sure the name on the touch screen is the same as that of your Wi-Fi Direct compatible
device and tap
Yes
.
Change Wireless Direct Connection Setting
1.
Make sure printer is turned on.
1.
2.
On the HOME screen, tap
(
Network
).
2.
3.
Tap
Wireless Direct
.
3.
4.
Tap
Settings
.
4.
5.
Change settings as necessary.
5.
• To update the identifier (SSID) and the password for wireless direct
•
Tap
Update SSID/password
to display the confirmation screen.
To update the identifier (SSID) and the password, tap
Yes
.
To check the updated password, tap
Show password
.
• To change the printer's name displayed on the Wi-Fi Direct compatible device
•
Tap
Wireless Direct network (SSID)
to display the printer's name (the initial value is "DIRECT-
XXXX-GP-NNNN") displayed on a Wi-Fi Direct compatible device.
Follow the procedure below to change the name.
1. Tap the device name entry field on the touch screen.
1.
2. Enter device name (up to 32 characters).
2.
3. Tap
OK
and confirm the entered device name.
3.
4. Tap
OK
.
4.
• To change the confirmation screen setting when a Wi-Fi Direct compatible device is connecting
•
to the printer
Tap
Connection request confirmation
to display the confirmation screen.
If you want the printer to display the screen to inform you a Wi-Fi Direct compatible device is
connecting to the printer, tap
Yes
.
Important
• To prevent an unauthorized access, we recommend you should not change the setting from
the default.
When you finished performing the settings, the printer returns to the
Wireless Direct settings
screen.
238