JVC GY-HC900STU 2/3" HD Connected Cam Studio Camcorder (Body Only) - Manual (Page 99)

Time Code Playback
Time code or user’s bit recorded on an SD card can
be displayed on the LCD monitor and viewfinder.
Memo :
0 The time code is also superimposed on the
video signal output from the [HD/SD SDI OUT
1/2] terminal.
0 If a section without time code is played back, the
time code will stop. However, playback will
continue.
Displaying Information during Shooting
Pressing the [DISPLAY] button during playback
displays the display screen.
Pressing the [USER4] button during shooting
switches the display information between camera
information display, GPS display and turning off the
display.
0 The GPS display displays information on the
recording location of the video being played
back only when GPS information has been
recorded.
0 Camera information display displays only
information of Gain, Iris, Shutter and White
Balance that have been recorded.
.
5600K
1/ 100
F1. 6
0 dB
+35.483197
+139.652172
USER4
USER4
USER4
GPS Display
Camera Information Display Display Off
Memo :
0 Trimming information is displayed while
trimming is in progress. In this case, pressing the
[USER4] button does not switch the display.
Playing Recorded Clips
99
Playback