JVC GY-HC900STU 2/3" HD Connected Cam Studio Camcorder (Body Only) - Manual (Page 111)

Lens REC
For selecting a function to be assigned to the
Record button (VTR button, etc.) on the lens.
A menu is displayed only when the FS-790 or
FS-900 is connected.
0 Intercom2:
Turns on/off the Intercom 2 connection.
0 Intercom1:
Turns on/off the Intercom 1 (intercom)
connection.
0 Rec:
Starts/stops recording.
[Setting Values: Intercom2, Intercom1, R Rec]
Memo :
0 This function is available when it can be
assigned to the Record button (VTR button, etc.)
on the lens in use.
0 Configure to “Intercom1” when configuring the
intercom with the FS-790 connected.
0 When the FS-900 or FS-790 is connected, the
functions of “Intercom1” and “Intercom2” can
also be assigned to a user button.
User Switch Set...
For specifying user button related settings.
(
A
P111 [User Switch Set Item] )
Full Auto...
For configuring the Full Auto settings.
(
A
P115 [Full Auto Item] )
User Switch Set Item
USER0 to USER8, USER9 J , USER10 K ,
USER11 H , USER12 I , USER13 R (front),
USER1 (VF), USER2 (VF), LENS RET
The preconfigured function can be operated (on/
off, start, switch) by assigning one of the functions
in the following menu table to [USER0], [USER1],
[USER2], [USER3], [USER4], [ONLINE/5],
[USER6], [USER7], [USER8], [ J /9], [ K /10], [ H /11],
[
I
/12], front [SET/USER13] button, [RET] button
on the lens and the [USER1(VF)] and [USER2(VF)]
buttons on the viewfinder.
Set according to the shooting conditions. Usable in
the Camera mode.
(
A
P45 [Assignment of Functions to User
Buttons] )
Memo :
0 When a viewfinder is connected, priority is given
to the [ZEBRA] switch of the viewfinder and the
user button that is assigned with the “Zebra”
function will not function.
0 “Focus Assist +” is a combination of the “Focus
Assist” and “Expanded Focus” functions.
0 “Skin Detail +” is a combination of the “Skin
Detail” and “Skin Area” functions.
0 The [SET/USER13] button at the front functions
as the [STATUS/SET] button in the factory
setting, but it can also be assigned with the
[USER13] function.
0 If “VF Display” is assigned to the [USER1(VF)]
or [USER2(VF)] button of the viewfinder, the
button can also be used in the Media mode.
Camera Function Menu
111
Menu
Display and
D
etailed
S
etti
ngs