beautypg.com

Others, Error messages and actions, P218 [error messages and actions] ) – JVC GY-HC900STU 2/3" HD Connected Cam Studio Camcorder (Body Only) User Manual

Page 218

background image

Error Messages and Actions

Warning display on the LCD monitor and viewfinder screen, tally lamp indication and warning tone are as

follows according to the error status.
Memo :

0

This camera recorder makes use of a microcomputer. Noise interference from external sources may

prevent it from functioning properly. When this occurs, turn off and on the power of the camera recorder

again.

Error Message

Status

Action

Turn Power Off Turn Back On

Later

System error.
* The warning tone sounds and the

tally lamp blinks twice every

second.

Turn off the power, and turn it on

again.

If the error persists, please contact

the local dealers in your area.

Fan Stop Detected Please

Turn P.Off

0

The fan stopped running.

Please contact the local dealers in

your area.

Fan Maintenance Required

Usage time of the fan has exceeded

9000 hours.

Check the fan and replace

accordingly. For more details,

please contact the local dealers in

your area.
Memo :

0

You can check the usage time of

the fan in [System]

B

[System

Information]

B

[Fan Hour].

(

A

P150 [ Fan Hour ] )

Getting Overheated.

 

Please

Turn Power Off.

0

The battery has exceeded the

specified temperature.

0

The power turns off

automatically after about 15

second.

0

Wait until the temperature drops

or replace the battery.

0

If the error persists, please

contact the local dealers in your

area.

Rec Inhibited

[REC] button is pressed when the

write-protect switch of the SD card

is set.

Turn off the write-protect switch of

the SD card, or insert a recordable

SD card.

(

A

P47 [SD Card] )

Lost Media Info *

0

Card is removed while recording

is in progress.

0

Card is removed while

formatting is in progress.

0

Card is removed while restoring

is in progress.

0

Card is removed while adding

the OK mark.

0

Card is removed while writing a

setup file.

0

Card is removed while deleting a

clip.

(*: A, B)

Restore the card using this camera

recorder.

(

A

P51 [Restoring the SD Card] )

218

Error Messages and Actions

Others