JVC GY-HC900STU 2/3" HD Connected Cam Studio Camcorder (Body Only) - Manual (Page 146)

o Username
Enter the user name for connecting to the FTP
server.
* Enter not more than 31 characters.
o Password
Enter the password for connecting to the FTP
server.
* Enter not more than 31 characters.
o PASV Mode
For setting whether to set the communication mode
used for file transfer to the passive mode.
Set to “On” if the camera is inside a firewall, and a
connection from the FTP server to the camera
cannot be established.
[Setting Values: On, R Off]
Memo :
0 When [Protocol] is set to “SFTP”, this item
appears as “---” and cannot be selected.
Upload Item 0
Upload
For configuring the method for uploading to the
FTP server.
0 Auto:
Select this option for automatic FTP transfer.
FTP transfer starts when [Automatic upload] is
configured to “On”.
0 Manual:
Select this option for manual FTP transfer from
the Media mode.
[Setting Values:
R
Auto, Manual]
Auto Upload
When [Upload] is configured to “Auto”, FTP
transfer starts automatically when the setting is
configured to “On”.
[Setting Values: On,
R
Off]
Memo :
0 This is fixed at “Off” when [System] is set to
“High-Speed” 2 .
9 Slot
For selecting the recording media slot to enable
automatic upload.
[Setting Values: R A, B]
9 Cellular
For configuring whether to enable connection via a
USB cellular adapter.
[Setting Values: Enable,
R
Disable]
9 Server
For configuring the server for uploading to the FTP
server.
[Setting Values:
R
Clip-FTP1, Clip-FTP2, Clip-
FTP3, Clip-FTP4]
Clip Server
Clip-FTP1, Clip-FTP2, Clip-FTP3, Clip-FTP4
* The name that is set in [Alias] is displayed
individually.
o Alias
For setting a name to distinguish the settings of this
camera.
The name set in this item will appear on the [FTP
Upload] action screen of the thumbnail display.
* Enter not more than 31 characters.
o Protocol
For setting the protocol of the FTP server to be
connected.
0 FTP:
Protocol that does not encrypt the incoming and
outgoing data.
0 SFTP:
Protocol that encrypts incoming and outgoing
data using SSH.
0 FTPS:
Protocol that encrypts incoming and outgoing
data using SSL or TLS. It uses an implicit mode
(starts encrypted communication once
connection starts).
0 FTPES:
Protocol that encrypts incoming and outgoing
data using SSL or TLS. It uses an explicit mode
(starts encrypted communication after
permission is granted).
0 ZIXI:
Enables stable transmission by reducing jitter
and packet loss significantly through
communicating via a relay server.
[Setting Values: R FTP, SFTP, FTPS, FTPES, ZIXI]
Memo :
0 To use the “ZIXI” setting, a dedicated server is
needed separately.
0 If “ZIXI” is set, the resume function is enabled.
146
Network Menu
Menu
Display and
D
etailed
S
etti
ngs