P134 [ genlock input ] ) – JVC GY-HC900STU 2/3" HD Connected Cam Studio Camcorder (Body Only) User Manual
Page 134
SD Aspect
For setting the style of displaying images with a
16:9 aspect ratio on a 4:3 aspect ratio screen.
0
Side Cut:
Displays image with the left and right sides cut
off.
0
Letter:
Displays as a wide image with the top and
bottom blackened.
0
Squeeze:
Displays image that is squeezed horizontally.
[Setting Values: Side Cut, Letter,
R
Squeeze]
Memo :
0
When [Record Format]
B
[System] is set to
“SD”, and [Record Format]
B
[SD Aspect] is set
to “4:3”, “---” is displayed and selection is
disabled.
2
0
[System]
B
[Record Set]
B
[Record Format]
B
[System] is set to “SD”, “Squeeze” and “Letter”
can be selected.
2
SD Set Up
For selecting whether to add a setup signal to the
video signal output from the [VIDEO OUT] terminal.
Setup signals are added when “7.5%” is selected.
[Setting Values: 7.5%,
R
0.0%]
Memo :
0
Depending on the menu settings of the camera
recorder and the condition of the cable
connected to it, the setup signal setting may be
fixed at “0.0%”. “0.0%” is displayed in gray in this
case.
0
When [System]
B
[Record Set]
B
[Record
Format]
B
[Frame Rate] is set to “50p” or “50i”,
“---” is displayed and selection is disabled.
Genlock Input
For selecting the input destination of video
synchronizing signals.
0
SDI IN:
Inputs video synchronizing signals from the [HD/
SD SDI IN] terminal.
0
Adapter:
Inputs video synchronizing signals from the
adapter connected to the accessory connection
terminal (68 pins) on the rear of the camera
recorder.
0
GENLOCK:
Inputs video synchronizing signals from the
[GENLOCK] terminal.
[Setting Values: SDI IN, Adapter,
R
GENLOCK]
Memo :
0
When “HD(SDI In)” or “SD(SDI In)”
2
is
selected in [System], “SDI IN” is displayed and
selection is disabled.
Genlock Adjust...
Adjusts the H Phase of the camera recorder’s video
signals with respect to the input synchronizing
signals.
9
SD-SDI H Phase
Adjusts the H Phase of the camera recorder’s SD-
SDI signal with respect to the external
synchronizing signal input to the terminal set in the
[Genlock Input] item.
[Setting Values: -373 to +373] (
R
0)
Memo :
0
When there is no SD video output from the [SDI
OUT] terminal, “---” is displayed and selection is
disabled.
9
HD-SDI H Phase
Adjusts the H Phase of the camera recorder’s HD-
SDI signal with respect to the external
synchronizing signal input to the terminal set in the
[Genlock Input] item.
[Setting Values: -1024 to +1023] (
R
0)
Memo :
0
When there is no HD video output from the [SDI
OUT] terminal, “---” is displayed and selection is
disabled.
134
A/V Set Menu
Menu
Display and
D
etailed
S
etti
ngs