JVC GY-HC900STU 2/3" HD Connected Cam Studio Camcorder (Body Only) - Manual (Page 94)

3 Set the time interval to start recording in
[Interval Rec].
To configure the setting, go to [System]
B
[Record Set]
B
[Rec Mode]
B
[Rec Interval].
(
A
P154 [ Rec Interval 1 ] )
4 Start recording.
0 Press the [REC] button to record only the
number of frames specified in [Rec Frames]
and pause.
0 After the specified time in [Rec Interval] has
passed, recording starts again to record only
the number of frames specified in [Rec
Frames] and pause.
0 Interval Rec continues until the recording is
stopped.
The display changes (“STBY N ”
B
“
R
REC N ”
B
“STBY N ” (red text)
B
“
R
REC N ”
B
“STBY N ” (red text)).
0 The card slot status indicator lights up in red.
5 Press the [REC] button.
0 The card slot status indicator lights up in
green.
0 The display becomes “STBY N ”.
Caution :
0 Do not remove the SD card during recording
( R REC N , red text) or recording pause (STBY N ,
yellow text).
0 To remove the SD card during Interval Rec,
press the [CANCEL/RESET] button, check that
“STBY N ” (white text) is displayed and the card
slot status indicator lights up in green before you
remove the card.
0 When the [TC GEN] selection switch is set to “F-
RUN”, the time code will be recorded in “R-
RUN”.
0 Audio cannot be recorded. The audio level
meter is grayed out.
(
A
P162 [Audio Level Meter] )
Splitting the Clips Freely
(Clip Cutter Trig)
0
You can split the clips freely without having to stop
recording during shooting.
1 Assign the “Clip Cutter Trig” function to
any of the user buttons.
(
A
P45 [Assignment of Functions to User
Buttons] )
2 Press the user button that is assigned with
“Clip Cutter Trig” during shooting.
A clip cut icon ( Q ) appears on the display
screen for 3 seconds, and the clip is split.
.
100min
50min
282min
1/ 60 F2. 8
AE ± 0 ND 1 /64
12 :34 : 56
ISO 102400
00: 00: 00.00
1080 /30p
SDI IN
ITU709
COMPRESS
5 . 6f t
B 5600 K
Memo :
0 Clips cannot be split again for a few seconds
after the operation is performed.
0 This item cannot be used when [Slot Mode] is
set to “Backup”.
0 This item cannot be used when [Rec Mode] is
set to a value other than “Normal” or “Pre Rec”.
(
A
P154 [ Rec Mode 0 1 ] )
0 The split clips are recorded seamlessly without
interruptions in the video.
0 When Exchange (U model) or MP4 (E model) is
selected, the clip cutter function cannot be used.
94
Special Recording 0
Sh
ooting