A/v set menu, Video set item, P131 [ sdi out2 char. ] ) – JVC GY-HC900STU 2/3" HD Connected Cam Studio Camcorder (Body Only) User Manual
Page 131: P131 [ hdmi char. ] ), P131 [ video out char. ] ), P 131)
A/V Set Menu
Menu screen for video output and audio.
Video Set...
For specifying video output-related settings.
Audio Set...
For specifying audio-related settings.
Video Set Item
SDI OUT2 Char.
For configuring whether to show the display and
menu on the [HD/SD SDI OUT2] terminal.
[Setting Values: On,
R
Off]
Memo :
0
When “VF” is selected for [SDI OUT2], the
setting is fixed at “On”.
HDMI Char.
For configuring whether to show the display and
menu on the [HDMI] terminal.
[Setting Values: On,
R
Off]
Memo :
0
When “VF” is selected for [HDMI OUT], the
setting is fixed at “On”.
Video OUT Char.
For configuring whether to show the display and
menu on the [VIDEO OUT] terminal.
[Setting Values: On,
R
Off]
SDI OUT1 Res.
For selecting the resolution of video output from the
[HD/SD SDI OUT1] terminal according to the
monitor to be connected.
[Setting Values: 1080psF, 1080p,
R
1080i, 720p,
576i, 480i]
Memo :
0
The selectable options vary according to the
setting in [System]/[
W
Resolution] and [
W
Frame
Rate] of [System]
B
[Record Set]
B
[Record
Format].
0
Cross conversion output is not possible.
0
When [A/V Set]
B
[Video Set]
B
[SDI OUT1
Res.] is set to “1080p”, configuring [System]
B
[GPS] to “On” changes the setting to “1080i”.
u
v
SDI OUT2/HDMI Res.
For configuring the resolution of the video output
from the [HD/SD SDI OUT2] and [HDMI] terminals
according to the monitor to be connected.
[Setting Values: 1080psF/i, 1080p,
R
1080i, 720p,
576p(HDMI only), 576i, 480p(HDMI only), 480i]
Memo :
0
The selectable options vary according to the
setting in [System]/[
W
Resolution] and [
W
Frame
Rate] of [System]
B
[Record Set]
B
[Record
Format].
0
Cross conversion output is not possible.
0
When “VF” is selected for [SDI OUT2], signal is
output from the [HD/SD SDI OUT 2] terminal at
1080p.
0
When “VF” is selected for [HDMI OUT], signal is
output from the [HDMI] terminal at 1080p.
SDI OUT1
For configuring video output from the [HD/SD SDI
OUT1] terminal.
[Setting Values: On,
R
Off]
Memo :
0
When a resolution with no SDI output is
selected, the setting is fixed at “Off”.
0
This item needs to be configured to “On” even
during SDI OUT1 output from the expansion unit
terminal (68-pin) at the back.
A/V Set Menu
131
Menu
Display and
D
etailed
S
etti
ngs