JVC GY-HC900STU 2/3" HD Connected Cam Studio Camcorder (Body Only) - Manual (Page 194)

4 Upload is complete.
0 After all clips are uploaded successfully,
“Successfully Completed.” is displayed.
Press the Set button (
R
) to return to the
thumbnail screen.
0 When clips are not uploaded successfully,
the following errors are displayed.
.
Cause of
Error
Exit
Internal Error.
Failed.
FTP Upload
(
A
P219 [List of FTP Transfer Errors] )
Memo :
0 If there is an error message or other notifications
when you switched to the Camera mode while
FTP upload is in progress, a 5 icon (yellow) will
appear in the remaining media space display
area in the Camera mode.
You can press the [CAM/MEDIA] button to
switch to the Media mode and display the above
error screen.
Follow “[List of FTP Transfer Errors] (
A
P 219)”
to clear the error message.
FTP Resume Feature
When FTP transfer starts and there is a file of the
same name on the server with a file size smaller
than the file to be transferred, the file on the server
will be regarded as an interrupted file during a FTP
transfer. A confirmation screen to resume transfer
(append writing) appears.
. If “Resume” is selected, FTP transfer is carried out
such that it appends from the position where it was
interrupted.
When FTP transfer ends normally, “Complete”
appears on the screen.
Memo :
0 FTP server equipped with resume function is
required.
0 If [Network]
B
[Upload Settings]
B
[Clip
Server]
B
[Clip-FTP1/2/3/4]
B
[Protocol] is set
to “SFTP”, the resume function is disabled.
0 If “HTTP” is selected in the [Select FTP Proxy]
screen of the network connection setting, the
resume function is disabled.
194
Uploading a Recorded Video Clip
Con
nectin
g to the Network