JVC GY-HC900STU 2/3" HD Connected Cam Studio Camcorder (Body Only) - Manual (Page 89)

3 Start normal recording (normal recording
into slot A)
0 Press any of the [REC] buttons.
0 Recording into the media in slot A starts.
(The characters “ R REC” appear in red.)
0 The card icon of slot A turns red (unselected
state), and the status indicator of slot A blinks
in red.
.
100min
50min
282min
1/ 60 F2. 8
AE ± 0 ND 1 /64
12 :34 : 56
ISO 102400
00: 00: 00.00
1080 /30p
SDI IN
ITU709
COMPRESS
5 . 6f t
B 5600 K
50min
100min
Red (not selected)
4 Stop normal recording.
0 Press any of the [REC] buttons again.
0 Recording to slot A stops, and the card slot
mark of slot A turns white (unselected state).
0 The characters “
R
REC” (red) changes back
to “STBY” (white).
0 The status indicator of slot A goes out.
.
100min
50min
282min
1/ 60 F2. 8
AE ± 0 ND 1 /64
12 :34 : 56
ISO 102400
00: 00: 00.00
1080 /30p
SDI IN
ITU709
COMPRESS
5 . 6f t
B 5600 K
50min
100min
White (not selected)
5 Stop backup recording.
0 Select [STBY] in [System]
B
[Record Set]
B
[Slot Mode]
B
[Backup Rec] and press the
Set button (
R
).
(
A
P155 [ Slot Mode ] )
0 You can also press the user button that is
assigned with “Backup Trig”.
(
A
P111 [User Switch Set Item] )
0 Recording to slot B stops, and the card slot
mark of slot B turns white (unselected state).
0 The status indicator of slot B lights up in
green.
.
100min
50min
282min
1/ 60 F2. 8
AE ± 0 ND 1 /64
12 :34 : 56
ISO 102400
00: 00: 00.00
1080 /30p
SDI IN
ITU709
COMPRESS
5 . 6f t
B 5600 K
50min
100min
White
Memo :
0 During backup recording, if the space of one
card runs out, recording stops only for the card
that is full.
0 When recording to both slots is stopped,
recording in the REGEN mode will be enabled
for the card slot in which recording started.
0 When recording is started in the other slot while
recording to one slot, the clip being recorded is
split and simultaneous recording to the other
card starts.
0 When recording is stopped for either slot A or B
while recording to both slots, the clip on the slot
which is still recording is split.
0 Although the clips are separated during
recording the clips can be seamlessly joined by
arranging them on the timeline of the editing
software since they are recorded seamlessly.
0 Clip Cutter Trig cannot be performed during
backup recording.
(
A
P94 [Splitting the Clips Freely (Clip Cutter
Trig) 0 ] )
0 When [Slot Mode] is set to “Backup”, [Rec
Mode] can only be set to “Normal”.
(
A
P154 [ Rec Mode 0 1 ] )
Backup Rec 0
89
Sh
ooting