Enterasys Networks 7S4280-19-SYS - Manual (Page 91)

Enterasys NAC Controller Hardware Installation Guide A-1
A
Specifications and Regulatory Compliance
This appendix provides operating specifications for the NAC Controller. Enterasys Networks
reserves the right to change the specifications at any time without notice.
7C111 Chassis Specifications and Regulatory Compliance
Physical Specifications
The physical specifications for the module 7C111 chassis, power supply modules, and the fans are
as follows:
7C111 Chassis
For information about... Refer to page...
7C111 Chassis Specifications and Regulatory Compliance A-1
NAC Controller Engine Interface Specifications A-3
NAC Controller PEP 2S4082-25 Module Specifications A-5
NAC Controller PEP 7S4280-19 Specifications A-6
Table A-1 Chassis Specifications
Item Specification
Physical
Dimensions: 8.81 H x 44.46 W x 51.92 D (cm)
3.47 H x 17.62 W x 20.44 D (in.)
Weight:
Chassis empty:
Chassis with NAC Controller PEP:
6.36 kg (14 lb)
12.72 kg (28 lb)
Mean Time Between Failures (MTBF) 118,975 hours