Enterasys Networks 7S4280-19-SYS - Manual (Page 79)

The NAC Controller Initialization Procedure
Enterasys NAC Controller Hardware Installation Guide 6-11
8. A screen appears asking you to enter the NetSight server IP address. Enter the IP address of
the NetSight server as displayed in
Figure 6‐13 and click on OK to proceed.
Figure 6-13 Enter NetSight Server IP Address
9. A setup review screen appears allowing you to confirm your configuration. Confirm the setup
configuration as displayed in
Figure 6‐14 for In‐Band management type and Figure 6‐15 for
Out‐Of‐Band management type and click on Yes to proceed.
Figure 6-14 In-Band Management Type Configuration Setup Confirmation