Dell 23.8" OptiPlex 7410 All-in-One Desktop Computer (Gray) - Manual (Page 98)

11. Install the memory .
12. Install the back cover .
13. Install the stand .
14. Follow the procedure in After working inside your computer .
Power-button and I/O board
Removing the power-button and I/O board
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the stand .
3. Remove the back cover .
4. Remove the system-board shield .
5. Remove the I/O cover .
6. Remove the bottom cover .
7. Remove the I/O bracket .
About this task
The following image(s) indicate the location of the power-button and I/O board and provides a visual representation of the
removal procedure.
98 Removing and installing Field Replaceable Units (FRUs)