Dell 23.8" OptiPlex 7410 All-in-One Desktop Computer (Gray) - Manual (Page 119)

Table 36. System setup options—System Management menu (continued)
System Management
By default, the Disabled option is selected.
Auto on Time Enable to set the computer to turn on automatically every day or on a
preselected date and time. This option can be configured only if the Auto On
Time is set to Everyday, Weekdays, or Selected Days.
By default, the option is disabled.
Intel AMT Capability
Enable Intel AMT Capability Enable or disable the Intel AMT capabilty.
By default, the Restrict MEBx Access option is enabled.
MEBx Hotkey Enable or disable MEBx hotkey.
By default, the option is disabled.
USB Provision
Enable USB Provision Enable or disable the Intel AMT provisioning using the local provisioning file
through a USB storage device.
By default, the option is disabled.
SERR Messages Enable or disable SERR messages.
By default, the option is enabled.
Keyboard Errors
Enable Keyboard Error Detection
Numlock LED
Enable Numlock LED Enable or disable Numlock LED.
By default, the option is enabled.
Table 37. System setup options—Keyboard menu
Keyboard
Keyboard Errors
Enable Keyboard Error Detection Enable or disable the keyboard error detection.
By default, the option is enabled.
Numlock LED
Enable Numlock LED Enable or disable Numlock LED.
By default, the option is enabled.
Table 38. System setup options—Pre-boot Behavior menu
Pre-boot Behavior
Warning and Errors Enable or disable the action to be done when a warning or error is encountered.
By default, the Prompt on Warnings and Errors option is enabled.
Fastboot Enable to set the speed of the boot process.
By default, the Thorough option is enabled.
Extend BIOS POST Time Set the BIOS POST time.
By default, the 0 seconds option is enabled.
BIOS setup 119