Dell 23.8" OptiPlex 7410 All-in-One Desktop Computer (Gray) - Manual (Page 69)

Steps
1. Place and align the bottom cover with the display-assembly base.
2. Align the screw holes on the bottom cover with the screw holes on the display-assembly base.
3. Replace the three screws (M3x5) that secure the bottom cover to the display-assembly base.
Next steps
1. Install the I/O cover .
2. Install the system-board shield .
3. Install the back cover .
4. Install the stand .
5. Follow the procedure in After working inside your computer .
Retractable-camera assembly
Removing the retractable-camera assembly
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the stand .
3. Remove the back cover .
4. Remove the system-board shield .
About this task
NOTE: The retractable-camera assembly consists of the following components:
● camera
● microphones
The following image(s) indicate the location of the retractable-camera assembly and provides a visual representation of the
removal procedure.
Removing and installing Customer Replaceable Units (CRUs) 69