Selecting typestyles – Epson Y465ss127mo User Manual

Page 97

First, make sure that the TEAR OFF light is on, and then press the MICRO

FEED button. The display shows

Next, adjust the

tear-off position in

of an inch increments by pressing the FORM

FEED button

to feed the paper forward or the LINE FEED button

to feed it backward. After setting the position, press the MICRO FEED

button again.

Caution:

The short tear-off feature can only be used with the built-in

tractor feeding system.

Once you use the micro-adjustment feature to set the tear-off position,

the printer remembers that position even after it is turned off.

Selecting Typestyles

Your printer can produce a wide range of typestyles by using different

fonts, pitches, widths, and other print variations. You can select

typestyles in three different ways: by using software commands, by using

or by using other features available on the control panel. This

section describes how to select a typestyle using the FONT, PITCH, and

CONDENSED buttons on the control panel.

Using the Printer

3-33