Epson Y465ss127mo - Manual (Page 86)

11.
Press the button.
The display changes to: None:
12.
Press the or button to select the parity. In this example, Even
parity is selected.
The display changes to:
13.
Press the button.
The display changes to:
Press the button again to exit this option.
The display alternates between these two menus:
Press the button to save the defaults. (If you do not wish to save
the setting, press the button.)
If you saved the defaults, the display briefly shows:
It then briefly changes to:
This reminds you to turn your printer off and back on again to let
the changes in default settings take effect.
Finally, it changes to:
You are now back at the SelecType main menu.
16. To switch to another main menu mode, press the or button. If
you wish to exit SelecType mode, press the SelecType button.
Turn your printer off and back on again to allow your new default
settings to take effect.
3-22 Using the Printer