Reversing the paper to the standby position – Epson Y465ss127mo User Manual

Page 51

2. Press the FORM FEED button to feed the paper forward. Then tear it

off at the perforation.

Note:

If the perforation of the paper is not fed past the

edge

of the

paper guide the first time, press the FORM FEED button again. Do not

use the platen knob to feed the paper.

Reversing the paper to the standby position

After you have tom off the last page of printed paper, if you wish to

reverse-feed the paper remaining in the printer to the standby position,

follow the steps below.

When continuous paper is in the standby position, the holes at the top of

the first sheet stay fitted over the pins of the sprocket unit. When the

paper is in this position, you can switch to single sheet paper (see the

instructions in this chapter), reload the continuous paper, or remove the

continuous paper.

2-14

Paper Handling