Epson Y465ss127mo - Manual (Page 162)

6. You can choose to have the printer eject the sheets with the printed
side facing downward or upward. To have the printer eject the sheets
with the printed side facing downward, pull the front lever on the
right side of the cut sheet feeder forward. To eject the sheets with the
printed side facing upward, push this lever back.
If you eject the sheets with the printed side facing downward, the
paper is collated as it prints. If you eject the sheets with the printed
side facing upward, sheets are fed in reverse order but more sheets
can be stacked in the cut sheet feeder.
Caution: Never
move this lever
during
printing.
Testing the printer in the cut sheet feeder mode
When you perform the cut sheet feeder self test, the printer counts the
number of lines
on
the page and prints out this number at the bottom of
the first page. The number of lines counted by the printer becomes the
default page length setting. This setting, however, can be overriden by
SelecType or by software commands.
Using Printer Options
7-9