Epson Y465ss127mo - Manual (Page 87)

PRINT OUT SETTINGS
The PRINT SETTINGS mode gives you an immediate printout of
the current printer settings, the four macro settings, and the default
settings.
This mode is an invaluable tool that lets you check the macro settings
and defaults to decide if there is anything you want to change. It also
lets you verify changes you make to these settings with SelecType.
To use this mode, make sure the printer is loaded with paper and is
finished printing. Then follow the steps below.
1. Select the PRINT SETTINGS mode from the SelecType main
menu.
The display changes to:
2. Activate this mode by pressing the button.
The display changes to: PRINT,
3. Press the button to print.
If you do not wish to print, press the button. (You can also press
the button to abort while printing is in progress.)
Caution: Always make sure that paper is loaded before you enter the
PRINT OUT SETTINGS mode.
When printing is complete, the display changes to:
You are now back at the SelecType main menu.
4. To switch to another main menu mode, press the or button. If
you wish to exit SelecType mode, press the SelecType button.
Using the Printer 3-23