Epson Y465ss127mo - Manual (Page 60)

Multi-part paper is loaded the same way as continuous paper. For
details, see the section on loading continuous paper in this chapter.
Before loading the multi-part forms, press the PAPER SELECT button until
the TRACTOR light comes on.
WARNING: Do not load or print on multi-part forms if the
FRICTION light or CSF light is on.
Labels
If you need to print labels, choose the type of label that is mounted on a
continuous backing sheet with sprocket holes for use with the tractor. Do
not use single sheet labels on a shiny backing sheet because they almost
always slip a little if fed by friction alone.
You load labels the same way that you load continuous paper. See the
section on loading continuous paper in this chapter.
WARNING: Never feed labels backward through the printer.
Labels can easily come off the backing and jam the printer.
Also, never use the LOAD/EJECT button to eject labels. If a
label does become stuck in the printer mechanism, see your
authorized Epson dealer for assistance.
Since labels are especially sensitive to temperature and
humidity, always use them under normal operating
conditions.
Paper Handling 2-23