Epson Y465ss127mo - Manual (Page 82)

6. Press the button again to exit the font selection process. These
two screens are alternately displayed:
.
7. Press the or button to select the number of the macro to be
saved. You can choose a number from 1 to 4.
8. Press the button to save the macro.
(If you do not wish to save your changes to a macro, press the
button to abort. When you abort, the settings you select remain in
effect only until you turn off your printer.
If you save the macro, the display briefly shows:
Next, the display changes to:
You are now back at the SelecType main menu.
9. To switch to another main menu mode, press the or button. If
you wish to exit SelecType mode, press the SelecType button.
Whenever you wish to use a macro that you have changed and
saved, you can load it using the MACRO mode. Your changed
macro is saved even when you turn off the printer.
CHANGE DEFAULTS
The defaults are the settings in effect when you turn the printer on. The
following is a list of possible default settings for the LQ-2550.
P a r a l l e l , S e r i a l
19288 BPS
*Displayed only when the serial interface setting is selected
3-18 Using the Printer