Connecting a usb device or camera to the projector, Connecting a usb device to the control pad – Epson BrightLink 1485Fi 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw 3LCD Interactive Laser Projector User Manual
Page 53

53
You can project slide shows from image files on a connected USB device.
Parent topic:
Connecting to External USB Devices
Related tasks
Connecting a USB Device or Camera to the Projector
You can connect your USB device or camera to the projector's
USB-A
port and use it to project images
and other content.
1.
If your USB device came with a power adapter, plug the device into an electrical outlet.
2.
Connect the USB cable (or USB flash drive) to one of the projector's
USB-A
ports.
Note:
Use the USB cable supplied with or specified for use with your device. Do not connect a USB
hub or a USB cable longer than 10 feet (3 m), or the device may not operate correctly.
3.
Connect the other end of the cable (if applicable) to your device.
Parent topic:
Connecting to External USB Devices
Related tasks
Connecting a USB Device to the Control Pad
You can connect your USB device to the
USB-A
port on the control pad (BrightLink 1485Fi) and use it to
project images and other content.
1.
If your USB device came with a power adapter, plug the device into an electrical outlet.
2.
Connect a USB cable to either
USB-A
port on the projector and to the upper
USB-B
port on the
control pad.
3.
Enable
Connect ELPHD02
in the HDBaseT settings of the projector's Signal I/O menu.