beautypg.com

Epson BrightLink 1485Fi 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw 3LCD Interactive Laser Projector User Manual

Page 175

background image

175

Note:

You cannot adjust the black levels while projecting a test pattern, and you may not be able to

adjust the black levels correctly if the

Geometry Correction

settings are set too high. The brightness

and tone of the overlapping areas may differ from the rest of the image even after adjusting the black
level.

1.

Press the

Menu

button.

2.

Select the

Multi-Projection

menu and press

Enter

.

3.

Select the

Black Level

setting and press

Enter

.

Note:

The

Black Level

setting is displayed only if

Edge Blending

is enabled and at least one (top,

bottom, left, right) edge is set to

On

.

4.

Select the

Color Adjustment

setting and press

Enter

.

You see a screen based on the

Top Edge

,

Bottom Edge

,

Right Edge

, and

Left Edge

settings you

selected for the

Edge Blending

setting.

See also other documents in the category Epson Projectors: