Epson BrightLink 1485Fi 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw 3LCD Interactive Laser Projector User Manual

Page 255

255

Select the

Interactive

menu and press

Enter

Select

Directory

and press

Enter

Select the following options as necessary:

•

Directory Access Function

specifies whether to search an active directory server for user names

and email addresses.

•

LDAP Server

let you enter the IP address or fully qualified domain name (FQDN) for the LDAP

server. You can enter up to 64 alphanumeric characters. Do not use spaces or the following
symbols: " * + , : ; < = > ? [ \ ] ` |. If you specify an FQDN, you must configure a DNS server.

Note:

You cannot use the following IP addresses: 127.x.x.x, 192.0.2.x, or 224.0.0.0 to

255.255.255.255 (where x is a number from 0 to 255).

•

Port Number

lets you enter a port number for the LDAP server. The default port is 389. Specify

"3268" to search the global catalog.

•

Authentication

lets you set the type of authentication expected by the LDAP server. If you are

using

Digest-MD5

Simple

authentication and the

LDAP Server

setting is set to an IP address,

you must enable reverse DNS lookup on the DNS server.