Solutions when the image is not rectangular – Epson BrightLink 1485Fi 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw 3LCD Interactive Laser Projector User Manual

Page 346

346

• If you zoomed into or out of the image using the

E-Zoom

buttons, press the

Esc

button until the

projector returns to a full display.

• Check your computer display settings to disable dual display and set the resolution within the

projector's limits. (See your computer manual for details.)

• Check the resolution assigned to your presentation files to see if they are created for a different

resolution than you are projecting in. (See your software help for details.)

• Make sure you selected the correct

Projection

setting in the Installation menu.

• Try adjusting the image position using the

Image Shift

setting.

• If the image is not projected correctly when using multiple projectors, set the Screen Type setting in

the Installation menu to

16:9

• If you see black bands in the projected screen when using multiple projectors, set EDID to

3240x1080/60Hz

and Blend Range to

600

for both projectors.

Note:

If you cannot select

600

as the Blend Range setting, select a lower setting. Black bands may

appear on the side of the projected screen.

Parent topic:

Solving Image or Sound Problems

Related references

Solutions When the Image is Not Rectangular

If the projected image is not evenly rectangular, try the following solutions:

• If the projector is not mounted on the wall or ceiling, place it directly in front of the screen, lining up the

lens with the center of the screen, if possible.

• Use the

Image Shift

setting to adjust the image position, rather than moving the projector.

• Press the keystone buttons on the projector to adjust the image shape.

• Adjust the image shape using the individual

Geometry Correction

settings in the Installation menu.