Using multiple projectors (duolink), Setting the projector id – Epson BrightLink 1485Fi 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw 3LCD Interactive Laser Projector User Manual
Page 164
164
Using Multiple Projectors (DuoLink)
You can combine the projected images from two or more projectors to create one large image
(BrightLink 1485Fi). Follow the instructions in these sections to set up and project from multiple
projectors.
Note:
Wait at least 30 minutes after you start projecting before adjusting the image.
Note:
The interactive features are not available when connecting more than two projectors. See the
online
Edge Blending Setup Guide
(available only in English) for additional information.
Projector Identification System for Multiple Projector Control
Adjusting Color Uniformity
Blending the Image Edges
Matching the Image Colors
Adjusting the Black Level
Adjusting RGBCMY
Scaling an Image
Parent topic:
Projector Identification System for Multiple Projector Control
You can operate multiple projectors using one remote control for more elaborate presentations. To do
this, you assign an identification number to each projector and to the remote control. Then you can
operate all the projectors at once or individually.
Setting the Projector ID
Setting the Remote Control ID
Parent topic:
Using Multiple Projectors (DuoLink)
Setting the Projector ID
If you want to control multiple projectors from a remote control, give each projector a unique ID.
1.
Press the
Menu
button.
2.
Select the
Multi-Projection
(BrightLink 1485Fi) or
Installation
(BrightLink 1480Fi) menu and press
Enter
.