Selecting settings for a directory server – Epson BrightLink 1485Fi 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw 3LCD Interactive Laser Projector User Manual
Page 254
254
•
Authentication
lets you set the type of authentication expected by the mail server.
•
User name
lets you enter a user name for the mail server. You can enter up to 64 alphanumeric
characters. Do not use a colon (":") or spaces.
•
Password
lets you enter a password for the mail server. You can enter up to 64 alphanumeric
characters. Do not use a colon (":") or spaces.
•
From
lets you enter the email address to be displayed to the sender. You can enter up to 64
alphanumeric characters. Do not use spaces or the following symbols: " ( ) , : ; < > [ \ ]
•
Default e-mail address
lets you enter an optional address for testing. You can enter up to 64
alphanumeric characters. Do not use spaces or the following symbols: " ( ) , : ; < > [ \ ]
•
Send a test e-mail
lets you connect to the SMTP server and send a test email to the address you
set as the default.
•
Disallow Address Input
controls whether you can enter email addresses manually. When
enabled, you can only choose email addresses from an address book or directory service.
Note:
Use the displayed keyboard to enter the addresses. Press the arrow buttons on the remote
control to highlight numbers or characters and press
Enter
to select them.
5.
When you finish selecting settings, press the
Menu
button to exit the menus.
Parent topic:
Selecting Settings for a Directory Server
You can select the settings for specifying a email directory server for your projector.
1.
Press the
Menu
button on the remote control.