Adjusting the black level – Epson BrightLink 1485Fi 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw 3LCD Interactive Laser Projector User Manual
Page 174
174
4.
Press the left or right arrow button to select
Adjustment Level 8
.
Note:
There are several adjustment levels and you can adjust each level individually.
5.
Press the left or right arrow buttons to adjust the
Brightness
setting.
6.
Press the left or right arrow buttons to adjust the color tone for the
Red
,
Green
, and
Blue
settings if
necessary.
7.
Press
Esc
to return to the Multi-Projection menu.
8.
Select the
Operation
menu and press
Enter
.
9.
Select
Light Source Brightness Control
and press
Enter
.
10. Set the
Light Source Mode
setting to
Custom
and adjust the
Brightness Level
setting as
necessary.
11. Press
Esc
and repeat steps 2 through 6 for
Adjustment Level 7
through
2
.
12. When you are finished, press the
Menu
button.
Parent topic:
Using Multiple Projectors (DuoLink)
Adjusting the Black Level
When two images overlap, the overlapping area can appear differently from the areas that do not
overlap. You can use the projector's Black Level setting to make the difference less noticeable
(BrightLink 1485Fi).