Epson BrightLink 1485Fi 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw 3LCD Interactive Laser Projector User Manual

Page 349

349

Cleaning the Lens

Solutions When the Image Brightness or Colors are Incorrect

If the projected image is too dark or light, or the colors are incorrect, try the following solutions:

• Press the

Color Mode

button on the remote control to try different color modes for the image and

environment.

• Check your video source settings.

• Adjust the available settings on the Image menu for the current input source, such as

Brightness

Contrast

Tint

White Balance

Color Saturation

and

RGBCMY

• Make sure you selected the correct

Signal Format

EDID

setting in the Signal I/O menu, if available

for your video source.

• Make sure all the cables are securely connected to the projector and your video device. If you

connected long cables, try connecting shorter cables.

• Position the projector close enough to the screen.

• Make sure you have run the

Light Source Calibration

in the Management menu recently. If using

multiple projectors, perform the calibration on all projectors to ensure a consistent image quality.

• When using multiple projectors and the color of the projected image does not match between the

projectors, set Color Mode to

Multi-Projection

and adjust the Color Uniformity, Light Source

Brightness Control, Color Matching, Black Level, and RGBCMY settings to resolve the color
differences.

Parent topic:

Solving Image or Sound Problems

Related references

Solutions When an Afterimage Remains On the Projected Image

If you see an afterimage in the projected image, select

Refresh Mode

Start

in the Management menu.

Parent topic:

Solving Image or Sound Problems

Related references

Administration Settings - Management Menu