beautypg.com

Selecting a quick startup setting – Epson BrightLink 1485Fi 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw 3LCD Interactive Laser Projector User Manual

Page 152

background image

152

3.

Select the

Signal I/O

menu and press

Enter

.

4.

Set the

Inverse Audio

setting to

On

.

5.

Press

Menu

or

Esc

to exit the menus.

Parent topic:

Using Basic Projector Features

Selecting a Quick Startup Setting

If you want to quickly restart the projector within five seconds after turning it off, you can change the

Quick Startup

setting. You can select 20, 60, or 90 minutes of Quick Startup time.

Note:

The projector may take longer than five seconds to start up in the following conditions:

• When projecting from the projector's

USB-B1

or

HDMI Out

port

• When projecting with Screen Mirroring

• If whiteboard sharing was terminated in the previous session

• If you want to restore the whiteboard contents from the previous session

See also other documents in the category Epson Projectors: