Epson BrightLink 1485Fi 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw 3LCD Interactive Laser Projector User Manual

Page 363

363

Solutions When You Cannot Operate a Computer from the Projected Screen

If you are unable to access a computer from the projected screen, try the following solutions:

• Make sure the

USB Display

setting in the Signal I/O menu is set to

• Make sure you perform pen calibration when using the interactive pen for the first time so that the

projector recognizes the position of the pen correctly.

• Make sure

PC Interactivity

is turned on in the projector's interactive toolbar.

• Make sure the USB cable is securely connected. Disconnect the USB cable, and then reconnect it.

• When you are connecting your computer to the projector's

USB-B2

port, make sure the

USB-B2

setting in the Pen/Touch menu matches the HDMI input your computer is connected to.

• When connecting your computer to either of the control pad's (BrightLink 1485Fi) HDMI ports, make

sure to connect your computer to the

USB-B

port on the control pad and not directly to the projector.

• When connecting using Screen Mirroring, you need to set up your computer. Hold down the Windows

key and press

on your keyboard at the same time, then select

Allow mouse, keyboard, touch, and

pen input from this device

Parent topic:

Solving Interactive Problems

Solutions for Problems With Capturing, Printing, Saving, or Scanning

If you are having trouble capturing and pasting, or printing, saving, or scanning, try the following
solutions:

• If you are having trouble pasting a captured image, make sure the image is not HDCP protected.

• If a black frame appears around a pasted image, it may be because the image was shifted or resized.

• Connect only one printer or multifunction device at a time, and make sure the device is supported by

the projector.

• If you are having trouble printing or scanning, make sure the printer is not out of ink, jammed, or in any

other error state.