Connecting to external usb devices, Usb device projection – Epson BrightLink 1485Fi 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw 3LCD Interactive Laser Projector User Manual
Page 52
52
3.
If you hear a crackling noise or the volume is too high or low, adjust the
Mic Input Level
setting in
the Signal I/O menu.
Parent topic:
Related references
Input Signal Settings - Signal I/O Menu
Connecting to External USB Devices
Follow the instructions in these sections to connect external USB devices to the projector.
USB Device Projection
Connecting a USB Device or Camera to the Projector
Connecting a USB Device to the Control Pad
Selecting the Connected USB Source
Disconnecting a USB Device From the Control Pad or Projector
Parent topic:
Related tasks
USB Device Projection
You can project images and other content without using a computer or video device by connecting any of
these devices to your projector or to the control pad (BrightLink 1485Fi):
• USB flash drive
• Digital camera or smartphone
• USB hard drive
Note:
Digital cameras or smartphones must be USB-mounted devices, not TWAIN-compliant devices,
and must be USB Mass Storage Class-compliant.
Note:
USB hard drives must meet these requirements:
• USB Mass Storage Class-compliant (not all USB Mass Storage Class devices are supported)
• Formatted in FAT16 or FAT32
• Self-powered by their own AC power supplies (bus-powered hard drives are not recommended)
• Does not have multiple partitions