Pen calibration – Epson BrightLink 1485Fi 5000-Lumen Pixel-Shift Full HD Ultra-Short Throw 3LCD Interactive Laser Projector User Manual
Page 217
217
Note:
You can change the function of the button by changing the
Pen Button Function
setting in
the
Interactive
menu.
• To use the pen as a mouse in PC Interactive mode, do the following:
• To left-click, tap the board with the pen tip.
• To double-click, tap twice.
• To right-click, press the button on the side or press and hold the pen on the screen.
Note:
To make a long press of the pen act as a right-click on a Mac or PC, set the
Pen Tracking
Mode
setting to
Mouse Mode
and set the
Press and Hold
setting to
Right Click
.
• To click and drag, tap and drag with the pen.
• To move the cursor, hover over the board without touching it.
Note:
You can turn off the hovering feature using the
Pen Hovering
setting in the projector's
Pen/Touch
menu.
Parent topic:
Related references
Pen and Touch Setup Settings - Pen/Touch Menu
Interactive Settings - Interactive Menu
Pen Calibration
Calibration coordinates the position of the pen with the location of your cursor. You only need to calibrate
the first time you use your projector's interactive features. Calibration results remain until you calibrate
again.