Setting up network scanning – Epson ES-580W Wireless Duplex Document Scanner User Manual
Page 69
69
6.
Select
PIN Code Setup(WPS)
.
7.
Follow the instructions on the LCD screen to complete WPS setup.
Note:
Make sure you press
Start Setup
within two minutes of activating WPS on your router.
8.
Select the
return home icon to return to the home screen.
The
Wi-Fi icon displayed on the LCD screen indicates your wireless connection status. If the product
is not connected to the network, repeat these steps to try again.
Parent topic:
Related tasks
Setting Up Network Scanning
You can set up network scanning to your scanner through a direct connection to your scanner.
First, manually configure your scanner to connect to your network. Then follow the instructions here to
set up your computer for network scanning using the Epson Scan 2 Utility. Your scanner must be turned
on and connected to the network.
Note:
Make a note of the IP address or host name of the scanner so you can enter it in these steps.
1.
Do one of the following to start the Epson Scan 2 Utility:
•
Windows 10
: Click
>
EPSON
>
Epson Scan 2 Utility
.
•
Windows 8.x
: Navigate to the
Apps
screen and select
Epson Scan 2 Utility
.
•
Windows 7
: Click
>
All Programs
>
EPSON
>
Epson Scan 2
>
Epson Scan 2 Utility
.
•
Mac
: Open the
Applications
folder, click
Epson Software
, and click
Epson Scan 2 Utility
.
2.
Select
Settings
from the Scanner drop-down list.