Using wps to connect to a network, Using wps pin mode to connect to a network – Epson ES-580W Wireless Duplex Document Scanner User Manual
Page 68
68
Using WPS to Connect to a Network
Using WPS PIN Mode to Connect to a Network
Parent topic:
Using WPS to Connect to a Network
If you have a WPS-enabled wireless router, you can use Wi-Fi Protected Setup (WPS) to connect your
scanner to the network.
1.
Select
home, if necessary.
2.
Press the
icon.
3.
Select
Router
.
4.
Select
Start Setup
or
Change Settings
.
5.
Select
Push Button Setup (WPS)
.
6.
Follow the instructions on the LCD screen to complete WPS setup.
Note:
Make sure you press
Start Setup
within two minutes of activating WPS on your router.
7.
Select the
return home icon to return to the home screen.
The
Wi-Fi icon displayed on the LCD screen indicates your wireless connection status. If the product
is not connected to the network, repeat these steps to try again.
Parent topic:
Related tasks
Using WPS PIN Mode to Connect to a Network
If you have a WPS-enabled wireless router that supports PIN mode, you can use Wi-Fi Protected Setup
(WPS) PIN mode to connect your scanner to the network.
1.
Select
home, if necessary.
2.
Press the
icon.
3.
Select
Router
.
4.
Select
Start Setup
or
Change Settings
.
5.
Select
Others
.