Epson ES-580W Wireless Duplex Document Scanner - Manual (Page 141)

141
11. To install a new separation roller, insert the end of the roller into the hole on the right side and lower
the other end of the roller into place.
12. Close the separation roller cover until you hear it click into place.
Note: If you are not able to close the cover, the roller is not installed correctly. Remove the roller and
reinstall it, then try to close the cover again.
13. Close the scanner cover.
14. Connect any disconnected cables.
15. Plug in the AC adapter and turn on the scanner.
16. Reset the roller counter.
Note: Make sure to dispose of the pickup roller and the separation roller following the rules and
regulations of your local authority. Do not disassemble them.
Resetting the Scanner Roller Counter
Parent topic: Cleaning and Transporting Your Scanner
Related references
User Replaceable Epson Scanner Parts
Related tasks
Checking the Scanner Roller Counter
Resetting the Scanner Roller Counter